weld surface

But current density and heat flux on deformed weld pool surface are not similar Gauss distribution.

而变形熔池表面的电流密度和热流密度分布则不再符合近似的高斯分布.

互联网摘选

The thermal deformation in penetration welding with a laser has been investigated as a factor which results in the elevation on the surface of the weld.

研究了热变形对激光深熔焊焊缝表面形状的影响。

互联网摘选

The main features are that the back surface weiding seams are even, smooth and weld edge tidy, excellent in performances of welding technology and welding seam dynamics. Unique output special design can suit wire filling welding and form good-looking welding seam.

主要特点是背面焊缝匀称、光滑，焊趾整齐，焊接工艺性能及焊缝力学性能优良。独特的输出特性设计更适合填丝焊接，焊缝美观。

互联网摘选

The experimental method is the preliminary application for surface tension detection of weld pool.

实验研究方法为焊接熔池表面张力测定中的最初应用.

网络文摘精选

The results shown that a deformation-free joint with good weld surface appearance can be obtained with suitable welding conditions for butt-joint and lap-joint of the dissimilar materials.

结果表明，当焊接工艺参数合适时，可以获得表面成形良好、无变形的铝合金与钢的对接接头和搭接接头。

互联网摘选

The results show that the triaxial residual stresses and plastic strains can accumulate to relatively high values just below the surface and at a short distance away from the weld area.

结果表明，在表面焊道下面并且离开焊缝中心线若干距离的地方，出现相当高的三向拉伸应力和大的塑性应变积累。

互联网摘选

Penetrant flaw detection agent was used to detect the backing weld surface, and the number of cracks was indicated by surface crack rate.

打底焊缝正面使用渗透探伤剂探伤，用表面裂纹率表示裂纹的数量。

互联网摘选

It's very significant to monitor and measure the weld pool surface in tridimension.

熔池表面三维检测与测量意义深远,但是因实现困难而研究工作很少.

互联网摘选

analysis of creation cause of pockmarks on the weld surface in box post by double-wire submerged arc welding

箱形柱双丝埋弧焊焊缝表面麻点产生的原因分析

互联网摘选

The results show that: the weld surface of the aluminum alloy is slicked and the weld microstructure is refined obviously. At the same time, the weld properties of aluminum alloy are enhanced with matched longitudinal magnetic field parameters.

试验结果表明：外加纵向磁场作用下，焊缝表面成形良好、焊缝组织得到明显细化，同时发现铝合金焊缝各项力学性能在适当匹配参数的纵向磁场作用下得到不同程度的提高。

互联网摘选

research on sensitivity of centerline indentation and solidification cracking of weld surface at stainless steel welded pipe

不锈钢焊管焊缝中心线凹陷及凝固裂缝敏感性研究

互联网摘选

The experimental method is the preliminary application of surface tension detection of weld pool.

试验研究方法为焊接熔池表面张力测定中的最初应用.

互联网摘选

uniform weld surface, there is no crack, slag, weld, burn, crater and needle holes and other defects.

表面焊缝均匀，不存在裂纹、夹渣、焊瘤、烧穿、弧坑和针状气孔等缺陷。

互联网摘选

The method to measure the stress state on surface of material was introduced, and the state as well as the thermal relaxation behavior of residual stress for cross weld of low carbon steel was investigated.

介绍了材料表面应力状态的X射线测量方法，研究了低碳钢交叉焊缝残余应力状态及其热松弛行为。

互联网摘选

It can also avoid pretermission of plating, burnout of zinc layer on weld beam and heat affected zone, and other limitations on the inner surface of fuel tank made of galvanized sheet.

从而避免了传统电镀锌板直接焊接成型油箱内表面漏镀、焊缝及热影响区锌层烧损等缺陷。

互联网摘选